您的浏览器版本过低,为保证更佳的浏览体验,请点击更新高版本浏览器

以后再说X

欢迎光临~衡水乾力电机制造有限公司

产品展示
YP, YPKK 系列(H710~800)大型高压变频三相异步电动机

商品编号:

产品品牌:品牌一

产品类型:类型一

产品颜色:

点击次数:1260

上架时间:2021-09-07

全国服务热线:13663288881

我要询价

产品描述

未标题-17拷贝.jpg

  概述 Summary
  额定功率:1120~6300kW  Rate power: 1120~6300kW
  额定电压:3kV、6kV、10kV Rate voltage:    3kV、6kV、10kV
  机座号: 710~800    Frame size: 710~800
  极数:4~12极   Poles: 4~12p

  防护等级:YP系列:IP23 

  YPKK系列:IP54、IP55

 Protection degree: YP series: IP23
 YPKK series: IP54, IP55

  冷却方式:YP系列:IC06   

  YPKK系列:IC666            

 Cooling method:  YP series: IC06
 YPKK series: IC666

  调速范围:恒转矩:5~50Hz   

 恒功率:50~67Hz           

 Frequency range: constant torque: 5~50Hz
 constant power: 50~67Hz

 

  结构特点  Structural characteristics
  该系列电动机采用箱式钢板结构,采用高压变频器供电以达到无极调速的功能,电机通风罩或冷却器采用强制风冷的结构,确保电机在低频运行状态下的通风散热;电机轴承设计为端盖式滑动轴承,采用稀油站强迫润滑。当电机功率超过2000kW时,可根据用户要求,多配一副出线盒,用于引出三相绕组中的中性点。该产品具有高效节能、低噪音、振动小、调速范围广、 度高和高可靠性等优点,可驱动各种通用机械如风机、水泵、压缩机、矿山机械等,被广泛应用于电站、钢厂、矿山等工矿企业中。
This series motors with box type steel structure, can be ajusted its speed using high voltage inverter; Forced cooling structure for the cooler or protective cover, ensure the cooling effect of motor under low frequency operation; Sliding bearing is installed and forced lubricated by lubricating station. When the power is more than 2000kW, according to the requirement of customer, another terminal box can be installed to pick up the neutral point of winding.
This series motors have characteristics of high reliability, wide speed range, high precision, beautiful apperance, low noise, little vibration, and can be applied to fan, pump, compressor, mining machinery, engineering machinery installed in  power plant, steel mill, mine and so on.insulation, moisture-proof and shock resistance; Temperature senor for stator and bearing, non-stop oil filling and exit pipe, improve the protection ability and operation efficiency of the motors.
该系列产品适用于:1、较大的启动转矩;2、输电线路容量不足以启动鼠笼型电动机;3、启动时间长和启动较频繁;4、需要小范围调速。
This series motor can be applied to the requirements as follows: 1. The lager starting torque; 2. Power capacity is not enough to start a squirrel cage motor; 3. Long start time or start more frequently; 4. Adjust speed in a small range.


相关产品

首页 产品 一键咨询 顶部